Alloy Solid Tines Alloy Solid Tines aerate without the work of cleaning up the mess of cores and debris left behind with converbtional core aerating. GF Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC48-50 in our own heat treatment facility. Theh are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and on cores, play can be resumed immediately. Alloy Shatter Tines With their"+"shape , shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. GF shatter tines are manufactured from special high-carbon alloy and heat treated to RC48-50 in our own facility to ensure you of optimum quality. Alloy Spoons Tines Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging. Alloy Machined Side-eject Tines Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators. Standard Hollow Tines Designed to remove a soli core, GF standard hollow tines are constructed from alloy steel bar and heat treated to RC48-50 in our own heat traeatment facility. Alloy Slicing Knife Tines Alloy slicing knife tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our facility to RC48-50 and carry the same lifetime guarantee of quality as all our these tines.

Alloy Solid Tines Alloy Solid Tines aerate without the work of cleaning up the mess of cores and debris left behind with converbtional core aerating. GF Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC48-50 in our own heat treatment facility. Theh are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and on cores, play can be resumed immediately. Alloy Shatter Tines With their"+"shape , shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. GF shatter tines are manufactured from special high-carbon alloy and heat treated to RC48-50 in our own facility to ensure you of optimum quality. Alloy Spoons Tines Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging. Alloy Machined Side-eject Tines Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators. Standard Hollow Tines Designed to remove a soli core, GF standard hollow tines are constructed from alloy steel bar and heat treated to RC48-50 in our own heat traeatment facility. Alloy Slicing Knife Tines Alloy slicing knife tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our facility to RC48-50 and carry the same lifetime guarantee of quality as all our these tines.

Alloy Solid Tines Alloy Solid Tines aerate without the work of cleaning up the mess of cores and debris left behind with converbtional core aerating. GF Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC48-50 in our own heat treatment facility. Theh are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and on cores, play can be resumed immediately. Alloy Shatter Tines With their"+"shape , shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. GF shatter tines are manufactured from special high-carbon alloy and heat treated to RC48-50 in our own facility to ensure you of optimum quality. Alloy Spoons Tines Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging. Alloy Machined Side-eject Tines Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators. Standard Hollow Tines Designed to remove a soli core, GF standard hollow tines are constructed from alloy steel bar and heat treated to RC48-50 in our own heat traeatment facility. Alloy Slicing Knife Tines Alloy slicing knife tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our facility to RC48-50 and carry the same lifetime guarantee of quality as all our these tines.

Alloy Solid Tines Alloy Solid Tines aerate without the work of cleaning up the mess of cores and debris left behind with converbtional core aerating. GF Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC48-50 in our own heat treatment facility. Theh are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and on cores, play can be resumed immediately. Alloy Shatter Tines With their"+"shape , shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. GF shatter tines are manufactured from special high-carbon alloy and heat treated to RC48-50 in our own facility to ensure you of optimum quality. Alloy Spoons Tines Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging. Alloy Machined Side-eject Tines Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators. Standard Hollow Tines Designed to remove a soli core, GF standard hollow tines are constructed from alloy steel bar and heat treated to RC48-50 in our own heat traeatment facility. Alloy Slicing Knife Tines Alloy slicing knife tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our facility to RC48-50 and carry the same lifetime guarantee of quality as all our these tines.

Alloy Solid Tines Alloy Solid Tines aerate without the work of cleaning up the mess of cores and debris left behind with converbtional core aerating. GF Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC48-50 in our own heat treatment facility. Theh are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and on cores, play can be resumed immediately. Alloy Shatter Tines With their"+"shape , shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. GF shatter tines are manufactured from special high-carbon alloy and heat treated to RC48-50 in our own facility to ensure you of optimum quality. Alloy Spoons Tines Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging. Alloy Machined Side-eject Tines Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators. Standard Hollow Tines Designed to remove a soli core, GF standard hollow tines are constructed from alloy steel bar and heat treated to RC48-50 in our own heat traeatment facility. Alloy Slicing Knife Tines Alloy slicing knife tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our facility to RC48-50 and carry the same lifetime guarantee of quality as all our these tines.

Alloy machined side-eject tines remove a soli core which quickly exits the side of the tine through a precision machined slot. This slot is designed to aviod''plugging''that can occur using hollow tubular tines(especially the smaller diameters)in heavy soil conditions. GF manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC48-50 in our own heat treatment facility. Very popular for the multiple tine holders which fit all greens aerators.

Manufactured in our own facility from alloy steel and heat treated to RC48-50 for durability and wear, these spoons are formed with an open alot in the side for easy core ejection and to avoid plugging.

Rotary blade cutting device is speed rotary on the horizontal. Rotary blade speed is 3000-4000 r/min. Keep the rotary blade must always sharpening. Reasonable lawn trim level is 1/3. It can be adjusted through the return roller to achieve.

Rotary blade cutting device is speed rotary on the horizontal. Rotary blade speed is 3000-4000 r/min. Keep the rotary blade must always sharpening. Reasonable lawn trim level is 1/3. It can be adjusted through the return roller to achieve.